水泥井体钢模具排水高效，污物不易滞留，减少堵塞。通用型水泥井体钢模具规格：内径1米，外径1。2米，高1米，收口70公分，检查井钢模具采用的钢板为4毫米厚，勒筋8毫米厚。
The steel mould of cement well body has the advantages of high drainage efficiency, less retention of dirt and less blockage. Specification of general steel mould for cement well body: inner diameter 1m, outer diameter 1m. 2 m, 1 m high, 70 cm closing. The steel plate used for inspection well steel mold is 4 mm thick, and the rib is 8 mm thick.
检查井钢模具主要是采用优质的钣金材料制做而成，主要由主板：4mm，勒筋：8mm 。电力井钢模具尺寸：常规检查井模具高150cm，内径100cm，外径120cm，井口直径70cm，分两节组成，分别是井体模具、井口模具、井盖模具以及井体连接孔钢模具。
Inspection well steel mold is mainly made of high-quality sheet metal materials, mainly by motherboard: 4mm, rib: 8mm. Size of steel mould for power well: conventional inspection well mould is 150cm in height, 100cm in inner diameter, 120cm in outer diameter and 70cm in wellhead diameter, which is composed of two sections: well body mould, wellhead mould, well cover mould and well body connecting hole steel mould.
检查井钢模具使用方法：首先在井体钢模具内模喷一层柴油或脱模剂，为了脱模方便，然后将搅拌好的水泥倒入模具中，用振动棒进行振动，排除混凝土中的空隙，混凝土初期凝固即可拆模，约24小时
Usage of steel mould for inspection well: first, spray a layer of diesel oil or release agent into the inner mould of steel mould for well body. For the convenience of release, then pour the mixed cement into the mould and vibrate with vibrator to eliminate the voids in the concrete. The mould can be removed after the initial solidification of concrete for about 24 hours